INSTALL RALUS AGENT CENTOS MAC

These are only very quick tests so may not be that accurate. I have done some quick tests as to the latency of the video link and how it changes with resolution. On the listening pi (pi-tv) watch out for the ip address in it gst-launch-1.0 -v tcpclientsrc host=10.42.0.112 port=5000 ! gdpdepay ! rtph264depay ! h264parse ! omxh264dec ! videoconvert ! autovideosink sync=false Sending Pi (pivate-eye) note you will have to change the IP address raspivid -t 999999 -w 1080 -h 720 -fps 25 -hf -b 2000000 -o - | gst-launch-1.0 -v fdsrc ! h264parse ! rtph264pay config-interval=1 pt=96 ! gdppay ! tcpserversink host=10.42.0.112 port=5000ġ0.42.0.112 is the address of the sending pi. I am not a gstreamer scientist and there are probably much better ways of doing it but this seems to be working here. So after setting up the environment as described in either of the above I have been using the following commands. After a quick poke around mailing lists and google fu I have now got it up and running.

INSTALL RALUS AGENT CENTOS MAC

helped with sending but as the commands on both pages were for listening using a Mac I was out of luck. The first page I came across seemed to be ideal : and this got me up and going but I ran into issues with the sending and listening commands.

I did a bit of research around video streaming on the pi and there seem to be several methods used including using VLC or netcat or various other methods but they all seemed to be a little bit high latency and as we are going to be doing live video to a screen we want to keep that down so I went with Gstreamer. See this for an explanation of the name 🙂

Install ralus agent centos